Standard HydraSleeves

$25.00 – $40.00

The HydraSleeve™ is a passive groundwater grab-sampler used to obtain representative, real-time, groundwater sample of ALL compounds* from discrete interval, under natural groundwater flow conditions. Standard HydraSleeves are available in three different diameters to fit into different sized wells. Use the chart below to select which HydraSleeve is appropriate for your project.

*For more volume options, go to HS SuperSleeves

*If Sampling for PFAS, please use the HDPE sleeve found under: HS SuperSleeves for PFAS

The HydraSleeve makes groundwater sampling a simple, three-step operation that is more effective than pumping or bailing and can cut field sampling cost by 50 to 80% while reducing your carbon footprint significantly.

The low-cost, disposable HydraSleeve captures a "core" of water from any discrete interval in the screened portion of the well with no change in water level and minimal disturbance to the water column.

Why Use the HydraSleeve™?

Sample for ALL Compounds
Reduce Sampling Cost 50%-80%
Eliminate Purging and Purge-Water Disposal (IDW)
Highly Portable, No Special Tools or Equipment
Obtain Depth-Specific Concentration
Can be used for Vertical Profiling
Can be used to Sample Slow Recharge Wells
Proven accurate world-wide

Custom Suspension Tether Preparation Service

Don't spend time on site measuring out where to put your samplers to collect accurate samples. EON will use your well construction data to construct cut-to-length suspension tethers for individual wells so that all you need to do on each sampling event is connect your samplers to the pre-set attachment points. Click here for more detail.

Standard HydraSleeve Chart

*For more volume options, go to HS SuperSleeves.

Part Number	Sampler Type	Maximum Sampler Volume	Minimum Well Diameter	Dimensions	Bottom Weights	Standard Top Connection
GSH110	Standard HydraSleeve™	600ml	1.5" Sch 40 Wells	1.5" OD (Filled) x 30" Length	8oz (GSW305) or 16oz (GSW306)	Spring Clip (GSH300)
GSH130	Standard HydraSleeve™	1.1L	2" Sch 80 Wells	1.75" OD (Filled) x 37" Length	8oz (GSW311) or 20oz (GSW312)	Spring Clip (GSH300)
GSH230	Standard HydraSleeve™	3L	4" Sch 80 Wells	2.9" OD (Filled) x 37" Length	11oz (GSW315) or 20oz (GSW312)	Spring Clip (GSH310)