Standard PDBs (VOCs Only)
$19.00 – $32.00
The Equilibrator™ Passive Diffusion Sampler obtains representative, discrete interval samples of Volatile Organic Compounds in groundwater without purging or pumping. These samplers are effective and reliable for any site where VOCs are the main contaminant of concern. PDB’s can be ordered prefilled with clean, deionized water or can be delivered unfilled and filled in the field. Use the chart below to select which Standard PDB is appropriate for your project.
*For more passive diffusion samplers that can sample for a wider array of contaminants, including Metals, SVOCs, and 1,4 Dioxane, go to Dual Membrane PDBs
*If Sampling for PFAS, please use the HDPE diffusion sampler found under: Dual Membrane PDBs for PFAS
The Equilibrator™ Standard PDB is constructed from a semi-permeable polyethylene membrane, filled with deionized water, and lowered into the flow portion of the saturated screen where it resides for a minimum of 14 days. The semi-permeable, hydrophobic membrane has pores that allow the movement of VOC molecules between the well water outside the sampler and the deionized water inside the sampler so that once the sampler comes to equilibrium, it can be removed to capture an aquifer-representative sample.
Why Use the Standard PDB?
- Proven accurate to sample for VOCs
- Reduce sampling cost 50%-80%
- Highly Portable, No Special Tools or Equipment
- Obtain Depth-Specific Concentration
- Can be used for Vertical Profiling
- Can be used to Sample Slow Recharge Wells
- A Greener sampling method; less disposable material, no batteries, gasoline or waste.
Custom Suspension Tether Preparation Service
Don't spend time on site measuring out where to put your samplers to collect accurate samples. EON will use your well construction data to create cut-to-length suspension tethers for individual wells so that all you need to do on each sampling event is connect your samplers to the pre-set attachment points. Click here for more detail.
Standard PDB’s Chart
*To sample additional constituents than VOC’s, go to Dual Membrane PDB
Part Number | Sampler Type | Maximum Sampler Volume | Minimum Well Diameter | Dimensions | Bottom Weights | Standard Connections | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GSD125-PF1 | Standard PDB - Prefilled | 80mL | 1" Wells (Sch 40 & 80) | 0.75" OD x 18" Length | 6oz (GSW301) | Cable Ties (FSF106) | ||||||||||||
GSD152-PF1 | Standard PDB - Prefilled | 225mL | 1" Wells (Sch 40 & 80) | 0.75" OD x 48" Length | 6oz (GSW301) | Cable Ties (FSF106) | ||||||||||||
GSD163-PF1 | Standard PDB - Prefilled | 150mL | 1.5" Wells (Sch 40 & 80) | 1.3" OD x 18" Length | 8oz (GSW305) or 11oz (GSW310) | Cable Ties (FSF106) | ||||||||||||
GSD165-PF1 | Standard PDB - Prefilled | 250mL | 1.5" Wells (Sch 40 & 80) | 1.3" OD x 24" Length | 8oz (GSW305) or 11oz (GSW310) | Cable Ties (FSF106) | ||||||||||||
GSD175-PF1 | Standard PDB - Prefilled | 375mL | 1.5" Wells (Sch 40 & 80) | 1.3" OD x 36" Length | 8oz (GSW305) or 11oz (GSW310) | Cable Ties (FSF106) | ||||||||||||
GSD190 | Standard PDB - Unfilled | 150mL | 2" Wells (Sch 40 & 80) | 1.75" OD x 12" Length | 8oz (GSW311) or 20oz (GSW312) | Cable Ties (FSF106) | ||||||||||||
GSD200 | Standard PDB - Unfilled | 350mL | 2" Wells (Sch 40 & 80) | 1.75" OD x 18" Length | 8oz (GSW311) or 20oz (GSW312) | Cable Ties (FSF106) | ||||||||||||
GSD200-PF1 | Standard PDB - Prefilled | 350mL | 2" Wells (Sch 40 & 80) | 1.75" OD x 18" Length | 8oz (GSW311) or 20oz (GSW312) | Cable Ties (FSF106) | ||||||||||||
GSD210 | Standard PDB - Unfilled | 500mL | 2" Wells (Sch 40 & 80) | 1.75" OD x 24" Length | 8oz (GSW311) or 20oz (GSW312) | Cable Ties (FSF106) | ||||||||||||
GSD210-PF1 | Standard PDB - Prefilled | 500mL | 2" Wells (Sch 40 & 80) | 1.75" OD x 24" Length | 8oz (GSW311) or 20oz (GSW312) | Spring Clip (GSH310) | ||||||||||||
