HS SuperSleeves for PFAS

$27.50 – $33.00

The HydraSleeve™ is a passive groundwater grab-sampler used to obtain representative, real-time, groundwater sample of ALL compounds* from discrete interval, under natural groundwater flow conditions. SuperSleeves are a slightly narrower version of the HydraSleeve and can come in longer lengths to capture more volume. SuperSleeves for PFAS are made from HDPE instead of the more standard LDPE to avoid potential bias via sorption. Use the chart below to select which HDPE SuperSleeve is appropriate for your project.

*SuperSleeves require the use of a re-usable top collar, which can be found under: HydraSleeve Accessories

*Rinsate Test and Bench study for PFAS

The HydraSleeve makes groundwater sampling a simple, three-step operation that is more effective than pumping or bailing and can cut field sampling cost by 50 to 80% while reducing your carbon footprint significantly.

The low-cost, disposable HydraSleeve captures a "core" of water from any discrete interval in the screened portion of the well with no change in water level and minimal disturbance to the water column.

Why Use the HydraSleeve™?

Sample for ALL Compounds
Reduce Sampling Cost 50%-80%
Eliminate Purging and Purge-Water Disposal (IDW)
Highly Portable, No Special Tools or Equipment
Obtain Depth-Specific Concentration
Can be used for Vertical Profiling
Can be used to Sample Slow Recharge Wells
Proven accurate world-wide

Custom Suspension Tether Preparation Service

Don't spend time on site measuring out where to put your samplers to collect accurate samples. EON will use your well construction data to construct cut-to-length suspension tethers for individual wells so that all you need to do on each sampling event is connect your samplers to the pre-set attachment points. Click here for more detail.

Standard HydraSleeve Chart

*For more volume options, go to HS SuperSleeves.

Part Number		Sampler Type			Maximum Sampler Volume		Minimum Well Diameter			Dimensions				Bottom Weights			Standard Top Connection
GSH470		HS SuperSleeves for PFAS			1L		2" Sch 80 (50mm) Wells			1.75" OD (Filled) x 37" Length				8oz (GSW311) or 20oz (GSW312)			2 Piece PVC Top Collar (GSH323)
GSH475		HS SuperSleeves for PFAS			2L		2" Sch 80 (50mm) Wells			1.75" OD (Filled) x 68" Length				8oz (GSW311) or 20oz (GSW312)			2 Piece PVC Top Collar (GSH323)