HS SuperSleeves

$25.00$29.00

The HydraSleeve™ is a passive groundwater grab-sampler used to obtain representative, real-time, groundwater sample of ALL compounds* from discrete interval, under natural groundwater flow conditions. SuperSleeves are a slightly narrower version of the HydraSleeve, can come in longer lengths to capture more volume, and can be made with standard LDPE or HDPE for PFAS sampling. Use the chart below to select which SuperSleeve is appropriate for your project.

*If Sampling for PFAS, please use the HDPE sleeve found under: HS SuperSleeves for PFAS.

*SuperSleeves require the use of a re-usable top collar, which can be found under: HydraSleeve Accessories

SKU: N/A Categories: ,

The HydraSleeve makes groundwater sampling a simple, three-step operation that is more effective than pumping or bailing and can cut field sampling cost by 50 to 80% while reducing your carbon footprint significantly.

The low-cost, disposable HydraSleeve captures a "core" of water from any discrete interval in the screened portion of the well with no change in water level and minimal disturbance to the water column. 

Why Use the HydraSleeve™?

  • Sample for ALL Compounds
  • Reduce Sampling Cost 50%-80%
  • Eliminate Purging and Purge-Water Disposal (IDW)
  • Highly Portable, No Special Tools or Equipment
  • Obtain Depth-Specific Concentration
  • Can be used for Vertical Profiling
  • Can be used to Sample Slow Recharge Wells
  • Proven accurate world-wide

Custom Suspension Tether Preparation Service

Don't spend time on site measuring out where to put your samplers to collect accurate samples. EON will use your well construction data to construct cut-to-length suspension tethers for individual wells so that all you need to do on each sampling event is connect your samplers to the pre-set attachment points. Click here for more detail.

Standard HydraSleeve Chart

*For more volume options, go to HS SuperSleeves.

Part Number

Sampler Type

Maximum Sampler Volume

Minimum Well Diameter

Dimensions

Bottom Weights

Standard Top Connection

GSH430

HS SuperSleeves

1L

2" Sch 80 (50mm) Wells

1.75" OD (Filled) x 37" Length

8oz (GSW311) or

20oz (GSW312)

2 Piece PVC Top Collar (GSH323)

GSH435

HS SuperSleeves

1.5L

2" Sch 80 (50mm) Wells

1.75" OD (Filled) x 52" Length

8oz (GSW311) or

20oz (GSW312)

2 Piece PVC Top Collar (GSH323)

GSH440

HS SuperSleeves

2L

2" Sch 80 (50mm) Wells

1.75" OD (Filled) x 64" Length

8oz (GSW311) or

20oz (GSW312)

2 Piece PVC Top Collar (GSH323)

You may also like…